Rigi — BLDC Servo Drive 4 kW / 80 VDC / 50 A (VESC®-compatible)
CHF 499.00 excl. VAT
All prices excl. VAT.
Downloads
4 kW, 80 VDC, 50 A RMS: industrial BLDC servo drive and motor controller, fully VESC®-compatible. For robotics, automation and test benches where standard motor controllers reach their limits.
The Akrodyn Rigi is an industrially designed servo drive that is fully compatible with VESC® firmware and the VESC Tool. Unlike maker-oriented VESC boards, the Rigi was developed for continuous operation in mobile robotics, stationary systems and industrial environments: robust screw terminals instead of LiPo connectors, cooling plate mounting for genuine 50 A RMS continuous current, and compliance with CE/RoHS2.
The modular system consists of a Power Unit (PU-4000-80-50) and a Logic Unit (LU-VE-CAN), which are stacked directly. Different Logic Units will enable different communication interfaces and safety levels in the future, with an identical Power Unit.
Features
- Fully VESC®-compatible, existing firmware, VESC Tool and configurations transferable
- Robust: M4 screw terminals for VIN, GND, U, V, W (no LiPo or JST connectors)
- 50 A RMS continuous current (70 A DC) with cooling plate mounted at ≤ 40°C
- CAN interface (JST-PH), USB-C for configuration via VESC Tool
- SPI and incremental encoder inputs for precise field-oriented control
- Hall sensor input for brushless motors
- Efficiency > 99 %
- Compliant: EN55024, EN55011, EN55032, RoHS2
Note: The Akrodyn Rigi is based on the open-source VESC® firmware by Benjamin Vedder (vesc-project.com). The firmware can be freely modified and adapted. Akrodyn provides the industrialised hardware carrier board. The community firmware and the VESC ecosystem remain fully accessible.
Technical Specifications
| Parameter | Value | Unit |
|---|---|---|
| Input voltage | 10–80 | VDC |
| Rated power | 4 000 | W |
| Peak power (10 s) | 5 600 | W |
| Rated continuous current DC | 70 | A |
| Rated continuous current RMS | 50 | A |
| Peak current DC (10 s) | 100 | A |
| Peak current RMS (10 s) | 70 | A |
| Continuous current without cooling | 22 | A (RMS) |
| Efficiency | > 99 | % |
| Max. DC bus output voltage | > 95 | % |
| Ambient temperature | –25 to +40 | °C |
| Max. cooling plate temperature | 40 | °C |
| Weight PU | 65 | g |
| Weight LU | 47 | g |
| Dimensions PU (L × W × H) | 80 × 60 × 18 | mm |
| Compliance | EN55024, EN55011, EN55032, RoHS2 | — |
Variants
| Variant | SKU | Scope of Delivery |
|---|---|---|
| Rigi Standard | AK-SD-R-4000-80-50 | PU-4000-80-50 + LU-VE-CAN, stacked mounted |
| Rigi + universal brake chopper (set) | AK-SD-R-4000-80-50-BC | as standard + BC-12800-80-0R500 as module included |
| Rigi with integrated brake chopper shield | AK-SD-R-4000-80-50-BCI | PU + LU + BC shield in pre-mounted stack |
Typical Applications
- Mobile robots and autonomous vehicles
- Industrial servo and positioning systems
- Test bench and laboratory drives
- Development platforms (VESC-compatible)
Scope of Delivery (Standard)
- PU-4000-80-50 (Power Unit)
- LU-VE-CAN (Logic Unit, pre-installed stacked)
- Mounting kit (M3 screws)
- Configuration via VESC Tool (free, vesc-project.com)
Downloads
- Datasheet PU-4000-80-50
- Datasheet LU-VE-CAN
- System installation guide
Technical specifications
- Rated power
- 4 kW (S1)
- Voltage
- 10-80 V DC
- Interface
- CAN / USB-C / SPI encoder / Incremental encoder / Hall
- Dimensions
- 80 × 60 × 36
- Weight
- 112 g
- Certifications
- CE / RoHS2 / EN55024 / EN55011 / EN55032