All tools
CAN - WebUSB - DFU
CANable Firmware Updater
Update CANable CAN interface firmware straight from the browser. Switch between slcan and candlelight without installing any software.
Select firmware
slcan: classic UART-based CAN adapter (compatible with many tools).
candlelight: modern SocketCAN / gs_usb driver (recommended for Linux/CANopen).
Status: Ready. Select firmware and flash.
Instructions
- Put the CANable into DFU mode (boot jumper, or reset with the BOOT button)
- Select the firmware and click "Connect & flash"
- Select the device in the browser dialog
DFU Flash Log
CANable firmware updater ready.